In 2016, as 'Warrior' this yacht underwent a complete refit and series of performance upgrades at the Longitud Cero facility in Burriana, ESP. Design and engineering was overseen by Carkeek Design Partners. As part ofthe refit process, team staff removed, inspected, and serviced every item of deck hardware and wincheson the yacht, replacing fresh following the paintjob.
Upgrades:Keel Updates 

• Keel extended from 4.8 to 5.2m draft  
• Bulb weight reduced from 5t to 4t

Ballast Package 

• ballast tanks installed. 1.6t water - 800kg per side aft

• C6 Composite standing rigging
• All running rigging, loops, strops built new in-house

NDT structural inspections 2016: 

• Keel Ram heads 
• Rudders & Daggerboards
• Key Hull Structures 
• Mast

• Liferaft compartments & escape hatch installed in transom 
• VOR antenna structure removed and replaced with removeable mast
• Coachroof shape optimized for aesthetics & ergonomics
• Original hull paint removed 
• complete hull primed and longboarded, repainted in AwlCraftSE Metallic/Durepox 
• Foils longboarded & repainted Durepox Red 
• Deck Repainted Awlgrip Matterhorn white
• Addition of 4th pedestal aft 
• Addition of overdrive boxes for primary winches

Harken GrandPrix winch package:2x 1111 Primary 2x 65st Pit1x 990 Driven Pit 1x 990 Driven Mainsheet 2x 990 Runners 2x 50.2 Traveler4x Pedestals and below deck drivetrain

• VOR Media Desk and related electronics and structure removed 
• Pressure Fresh Water system installed with on-deck tap
• Interior non-skid paint refinished

Volvo D2-75 Propulsion engine: drives Custom Central Coast Hydraulics retractabledrive leg, with 4-blade fixed propeller and titanium prop shaft
Volvo D1-30 Generator: drives 2 high-amp alternators and Central Coast Hydraulics high speedkeel hydraulic pump.
2x 150L fuel tanks
Navtec Custom Sailing Hydraulics: Rotary Hydraulic Pump – Harken pedestal driven 

• Headstay 
• Cunningham 
• Outhaul 
• Backstay Deflector 
• Checkstay Deflector 
• Jib Tack

sailmon system with procesor E4

• Sailing Instruments: 
• Cosworth Pi Processor
• B&G Displays
• Custom Load & Position Sensor Array
• Multiple GPS Sources 
• Multiple Heading Sources
• B&G 4G Radar 
• B&G Zeus Touch and CZone Interface 
• 3x Mastervolt 150Ah Li-Ion Batteries 
• Masterbus Monitoring w/ CZone bridge 
• 2xAmerican Power 180A Alternators 
• FB250 Fleet Broadband Satellite Communications 
• PepWave 4G Router
• Engenius Wifi Router: deck screen interface 
• New navigation computer
• Kinetic Scientific Keel Controller with Daggerboard Position Sensors 
• Electric Hydraulic Pump – slow speed keel hydraulics

• Extended 2x sets of cradle structure to accommodate deeper keel
• Painted White 3x 40ft Containers

2x 110L fresh water tanks 12v Pressure water Pump – Galley tap & on-deck tap Spectra Venture 150 Watermaker – Fully Serviced
Workshop Container 

• Complete workshop with stainless steel countertops. Fitted with tool drawers and supply cabinets. 
• Appointed with lighting and 240V power outlets, AUS style.
• Boatbuilding Supplies and Tools 
• Sailing Hydraulic Spares and Tools 
• Keel Hydraulic Spares and Tools 
• Daggerboard Bearing Spares
• Steering system and Rudder bearing spares 
• Engine Spares 
• Winch System Spares
• 2x spare Alternators and assorted spares 
• Extensive set of Hitachi 18v cordless Power tools 
• Extensive set of 240V corded power tools
• Complete Hand Tools necessary to service anything on the boat x
• Parts Washer 
• Drill Press
• Assorted Lubes, Greases, etc 
• 2x Spreader Bars for lifting boat 
• 2x 220V Air Compressors 
• Portable Laminating Table and Cabinet
• 240V Vacuum Pump and assorted equipment

Rigging Shop/Sail Container

• 50/50 sail racks and wood top workbenches
• Fitted with tool drawers and supply cabinets
• Appointed with lighting and 240V power outlets, AUS style
• Rope and Rigging Spares and Tools 
• Rig Hardware Spares and Tools
• Sail Repair Supplies and Tools 
• Spare Batten sets and Batten hardware 
• Extensive Electronics Spares and Tools 
• 240V Refrigerator & Coffee Machine 
• 2x Spare Rudders
• Emergency Rudder Cassette for Transom Mounting
• Subaru Portable Generator - capable of powering all 3 containers

Storage Container 

• Shelving Racks, Small Office Desk. 
• Appointed with lighting and 240V power outlets, AUS style. 
• 240V Air Conditioning Unit
• Winslow 12-man Liferaft 
• Winslow 4-man Liferaft 
• Double Tethers 
• 17 Offshore Safety Harnesses
• 6 Inshore Safety Harnesses Tethers
• On-Board Spares Bags in Storage. 
• 3x Spare Daggerboards 
• Spare EC6 Standing Rigging for Rig #1
• Auxiliary Fuel Tanks 
• Fuel Jugs & Water Jugs 
• 240V Portable Worklighting Array 
• Assorted Fans and Heaters 
• Spare Sail Bags
• Galley Spares, and Galley Equipment 
• Older Spare Running Rigging 
• Lifting Strops and Shackles, and Custom Hardware for CtrPoint-lifitng yacht 
• Travel Lift straps for lifting yacht 
• Boatbuilding Consumables 
• Electronic Spares Surplus 
• Winch Spares Surplus 
• Charts, Navigation Spares 
• Hitachi 240V Table Saw 
• Hitachi 240V Chop Saw 
• 240V Window-mount AC unit

20’ Flat Rack

• Shippable Base for Custom Yacht Cradle
• 2x complete sets of Custom Support Splashes 
• 2x complete set of cradle supports and outriggers 
• 1x Bulb Cradle

Additional Assorted Equipment 2x Rolling Mast stands folding sawhorses Scaffolding Set – extensiveSpare boom