The Company presents the information of this vessel in good faith

possibility of auxiliary outboard motor and inflatable, price to negotiate

• Cockpit bottom self bailing
• 2 wet lockers with locks
• 2 solid wood footrests on cockpit benches
• Solid wood tiller with jointed extension

FITTINGS

• Light oak colour Alpi woodwork
• Vinyl fabric spar ceiling on deck counter-moulding

COMPANIONWAY

• Height to deck beam: 1.45 m
• 1 sliding companionway hatch with fitted window
• Space for storing table (saloon/cockpit)

FORWARD CABIN

• Double bed (1.90 m x 1.40 m) - Foam mattress with cover
• Cubbyholes and storage space
• Cabin/saloon separation curtain
• 1 circular opening deck hatch

SALOON

• Height to deck beam: 1.45 m
• 2 bench seats / SIngle berths (2.20 M x 0.60 M) with mattress and cover
• Storage
• 2 oilskins pegs

? 2 fixed hull portholes

• 1 battery 12 V, 50 Amp
• 1 electrical 12 V and 6 function panel with fuses
• Navigation lights
• Lighting: Ceiling lights and lamp fittings

• Sink with drain
• Space for cooker
• Storage

• Design made following European Directive requirements and according to EC certification.
• Monolithic hull design in polyester
• Structural counter moulding made with unidirectional fabrics laminated and stuck evenly to the hull
• Deck made of injection moulding (Fibreglass sandwich / Balsa wood / Polyester resin)
• Accessible areas covered in a «Picot» type non-slip surface
• Solid unhewn wood footrest, stuck and screwed, forms the deck hull join
• Cast iron keel, pivoted and adjusted with a manual system of lifting screw and handle. Mounted with adjustable plates
• 2 retractable polyester rudders with sleeve system
• Grey coloured hull - Anthracite grey hull decoration

RIGGING

• Standard mast 9/10 electro-polished aluminium installed on the deck, 1 level(s) of advanced cross trees
• Boom in anodised aluminium
• Standing rigging in single-strand stainless steel
• Shroud and lower shroud plates fixed to the deck hull join
• Single back-stay with cross-bracing adjusted by tackle
• 1 mainsail tackle mounted on snap shackle in cockpit bottom
• 1 Kicking strap
• 1 trimming tackle on boom
• Genoa furler
• 2 genoa sheet tracks with back and forth adjustable bearing car
• Rigging run back to cockpit
• Complete running rigging: 1 Genoa furler line, 1 Genoa halyard, 1 Main halyard, 2 reef lines
• 2 cheek blocks
• 4 clutches
• 1 Jam cleat
• 2 Belaying cleats
• 2 Bollards

WINCHES

• 2 aluminium winches (H08A): Genoa sheet, halyards and reef lines
• 1 winch handle(s)

MOORING -ANCHORING

• Self-bailing chain locker
• 1 Stainless steel bow fitting 1 stainless steel bow roller
• 4 Aluminium mooring cleats

The Company presents the information of this vessel in good faith